Premium Corrosion Resistant TMT Bars
CRS - Corrosion Resistant Steel
TMT bars are produced with corrosion resistance elements such as copper, chromium and phosphorus.
Applications
Underground environments, dams, bridges, public and private buildings, underwater structures, marine structures
TMT FE 550 CRS
Premium Corrosion Resistant TMT Bars
CRS - Corrosion Resistant Steel
TMT bars are produced with corrosion resistance elements such as copper, chromium and phosphorus.
Applications
Underground environments, dams, bridges, public and private buildings, underwater structures, marine structures
Why CRS TMT Bars?
Meenakshi TMT FE 500 CRS bars are used in building constructions that have higher risk of corrosion due to exposure to coastal, marine or underground environments such as dams, bridges, public or private buildings and underwater and marine structures etc.
Product USP's
Ideal for all structures
Extreme ductility
Longer life span
Corrosion resistant
Stringent quality control
On site rust resistance
Ideal for all structures
Extreme ductility
Longer life span
Corrosion resistant
Stringent quality control
On site rust resistance
PROPERTIES
PROPERTIES
Chemical Properties
Carbon (max)
Sulphur (max)
Phosphorous (max)
Sulphur & Phosphorus (max)
Carbon Equivalent
CRE Value (Cu+Cr+P)%(Min)
ISI Fe550D
Meenakshi TMT FE 550D
Meenakshi TMT FE 500 CRS
Physical Properties
Yield Stress (N/mm2) (Min)
Elongation % (Min)
UTS/YS Ratio
Tensile Strength (N/mm2)
ISI Fe550D
Meenakshi TMT FE 550D
Meenakshi TMT FE 500 CRS
No traverse crack should form after bending through 180° and a mandrel of diameter specified below.
Bars up to and including 20mm
<5d
<4d
<4d
Bars over 20mm
<6d
<5d
<5d
No traverse crack should form after bending through 45° and reverse bending the same through 22.5 around the mandrel diameter specified below.
Bars up to and including 10mm
<7d
<6d
<5d
Bars over 10mm
<8d
<7d
<7d
Have questions? Check out our FAQ’s
Write to us and we will call you
Download our brochure for more information
Have any queries ?
Interested in becoming a dealer/distributor ?
